How to Hang Wallpaper Borders – Your essential guide from I Love Borders!
So where to start? What may be obvious to some is not obvious to all, so make the decision of where do you want to hang your new wallpaper border. Not just which room but whereabouts on the wall? At the ceiling line, at picture rail height, around the centre of your room? It is improtant to establish this early so you can calculate what you need which leads us to step one.
Step One: Measure up
With your decision made of where you will hang your border you can now measure the distance around your room accuratly. You can confidently deduct any doors or windows from your mesaurements where needed but please remember to allow for any matching.
When it comes to borders we always try to avoid joins along a wall and match into and out of a corner, door frame, window recess etc so give yourself some surplus to account for the pattern repeat.
Step Two: That’s your lot
We hope you have viewed and are impressed by our selection of wallpaper borders and have shorlisted your favourites or even ordered a sample.
Now it is time to place your order of your chosen wall border, we can take this over the phone (delivery to billing address only) or you can use our secure and simple online checkout.
Whilst your chosen border will have been manufactured by a single supplier, there may have been multiple print runs so each roll will contain a Lot/Batch Number. At I Love Borders we have a batch guarantee so all rolls within a single order will be from a single batch, if you require additional rolls in a subsequent order - simply add your existing lot/batch details into the checkout comment box and we will do our best to send the same batch again.
Step Three: Adhesives add up
The majority of wallpaper borders will require an adhesive to hang them and this will be stated on the product page, selected products will be labeled as “paste the wall” or “non-woven” which also require an adhesive to be used and a just few are self-adhesive (peel and stick).
If your chosen dessign is not self-adhesive, you must use a vinyl-to-vinyl border and overlap adhesive. This is the only way to guarantee adhesion to painted walls or wallpapered walls, these surface coatings will have a vinyl content so the use of a traditional paste will risk all your good work coming down.
Our border and overlap adhesives are available in 250g tubes and 500g (0.5L) or 1kg (1L) tubs, these will cover one roll, up to three rolls and up to 6 rolls respectively.
Step Four: On the surface
Should you be applying your wallpaper border onto a PAINTED wall, lightly sand the area upon which the border will sit. The slightly pitted surface will strengthen the bond between the adhesive and the border. (Just ensure you don’t sand beyond the perimeters of the border.)
Step Five: Lap it up
When it's time to start hanging measure the length of your fist wall or section and cut a strip of border thats approximatly 4” (10cm) longer, this will allow a little overlap at each end. Use a good pair of scissors or a snap off knife to get a good clean finish for every cut.
Top Tip: Cut the length for your longest wall first, and perhaps save your shortest wall sections until last. You can then minimise the chance of a mid-wall join.
Step Six: Apply some patience
Now your length is ready it is time to apply the adhesive to the back side of the border, use a suitable flat surface, ideally a paste table for this so you have pleanty of room to work.
Whether your border is natural paper backed or non-woven (paste the wall) apply your adhesive to the back of the border using a small brush - don’t be shy about slapping it on just keep it off the surface pattern!
Once covered, gently fold the border in a concertina style, making sure it doesn’t crease as you fold it back on itself (adhesive side to adhesive side). Converting the border into a smaller, accordion-style shape will also make it easier to transport it to your wall too.
Now its time to let the adhesive be absorbed into the natrual paper backing, this will soak and expand (check the roll label for the correct soaking time), if you are using a non-woven (paste the wall) border, you do not need to wait at all. These products are stable and will not react to the moisture from the adhesive.
Non-woven products allow you to apply adhesive directly to the wall surface and then you can dry hang your product onto this, we believe this method is not particularly suited to hanging borders. Application of adhesive would need to be very precise using this method.
Step Seven: In position
Hanging your wallpaper border at the top of your wall is as simple as following the ceiling line, just leave a small half inch overlap in each corner.
With a centrally or “Chair Rail Border” applied around the middle of the of the room establish the preferred hight of hanging with a measuring tape. With this information use a spirit level to create a level line around your room with a pencil before your attempt to hang.
If you are not cutting your border into a door frame or window and you wish to surround these features make sure you overlap these by about 2 inches (5cm) as this will help prevent the border coming unstuck. With the overlaps, cut through both strips of border at a 45° angle from the corners – making sure to remove any excess pieces. Remeber to remove any surplus adhesive that may be on the surface using a clean, damp sponge to wipe any away.
Step Eight: Silky smooth
Happy that you have applied your new wallpaper border to your wall, you should now smooth away any air bubbles to maximise contact between the wall and the border using a paper hanging brush. Now that you have completed your first length you can you need to allow time for the adhesive to dry and bond with the wall.
If you notice any excess adhesive during the drying period, don’t panic! Simply use a clean damp sponge to remove it ASAP. If you are using a self-adhesive border extra care needs to be taken in regards to level and air bubbles, once it’s stuck down - it’s stuck!
Our Tip: Be careful not to adjust the positioning of the border too dramatically as you’re smoothing out the bubbles, as it can stretch and become loose.
Step Nine: Repeat
As with all hobbies and skills, practice makes perfect when it comes to learning a new DIY techniques. Repeat these steps for each length of border you need to hang, if you think you are going to run short contact us ASAP so we can attempt to send the same batch to you.
Deliveries are made by post or courier depending on the total volume and weight of items ordered. Deliveries should be expected within the hours of 8 am and 7 pm, a signature will be required for all courier dispatched items.
Not going to be at home? Have your order delivered to your business/work address if you do not think an adult will be available to accept and sign for your order.
Orders received over bank holidays or extended breaks will be shipped ASAP following the break, please expect a short delay in delivery. We are open during these times but our couriers and the postal service are not.
|SERVICE LEVEL||TIME||BORDERS ORDERS OVER £20||BORDERS ORDERS UNDER £20||DIY ITEM ORDERS||
|Standard Delivery||3-5 Working Days||FREE||£3.95||£4.95||FREE|
|Standard Delivery Extended* (inc. NI)||3-5 Working Days||FREE||£3.95||£4.95||FREE|
|Standard Delivery Ireland||3-5 Working Days||£11.95||£11.95||£11.95||£2.50|
*Selected postcodes are deemed to be extended or remote areas by our delivery partners, these areas may not get daily deliveries or require additional logistics to complete a delivery.
Express delivery upgrades are available in the checkout allowing your order to be upgraded to a First Class Service (selected postcodes are a two day service including Northen Ireland). Any express order placed before 13:00 Monday to Friday will be dispatched same day (excludes weekends, bank holidays and is always subject to stock) for delivery the next business day**.
**Subject to Royal Mail service guarantees/volume in the postal network, aim of delivery next working day.
OUTSIDE THE UNITED KINGDOM
Although at this present time we do not concentrate on sending deliveries outside the UK, we will happily quote on this service. Please click on the Contact Us page and provide us with the items you would like, the quantity and the full delivery address required.
ABOUT YOUR ORDER
Once we have confirmed your order has been placed you will receive a confirmation email. If a product is out of stock we will email you advising you of a revised delivery date. There are occasions when we have to wait for a products to be printed and so there may be a delay, and this gives you the choice whether to wait or not.
If there is a discrepancy with your order, please notify us within 3 working days. Should you wish to return your order, please email us in advance with your order details and reason for return. Please do not send returns back without contacting us first.
If you are not completely satisfied with your purchase from I Love Borders, you may return it within 28 days of ordering. Please email firstname.lastname@example.org with details of any return prior to sending your goods back.
It must be returned undamaged and in its original packaging with all roll labels for a full refund and postage will be at your cost.
Please include a copy of your advice note or a note with your Order ID, in addition please include your reason for return.
If a product has been produced individually to your specification then there are no rights to return. This does not affect your statutory rights.
Products should be returned to: Returns Department, I Love Borders, Warehouse 1, 679 Eccles New Road, Salford, M50 1AY, United Kingdom. This address should be used for returns only. We do not accept returns on samples.